Hi all,

Just setup a vortexbox on the E35m1-m with a M-Audio Delta66 sound card attached to it.

Got two questions to seek for your advise:-
1). How can I turn on all digital signal to my audio system ?

from the aplay -L, I have:

hdmi:CARD=Generic,DEV=0
HD-Audio Generic, HDMI 0
HDMI Audio Output

iec958:CARD=SB,DEV=0
HDA ATI SB, ALC887-VD Digital
IEC958 (S/PDIF) Digital Audio Output

iec958:CARD=M66,DEV=0
M Audio Delta 66, ICE1712 multi
IEC958 (S/PDIF) Digital Audio Output


in my config vortexbox, i have the following:-
ALSA device list
0 [Generic ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xfeb44000 irq 42
1 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfeb40000 irq 16
2 [M66 ]: ICE1712 - M Audio Delta 66
M Audio Delta 66 at 0xd0c0, irq 18



List of audio device ports
1: : sequencer
2: [ 0- 3]: digital audio playback
3: [ 0- 0]: hardware dependent
4: [ 0] : control
5: [ 2- 0]: digital audio playback
6: [ 2- 0]: digital audio capture
7: [ 2] : control
8: [ 1- 2]: digital audio capture
9: [ 1- 1]: digital audio playback
10: [ 1- 0]: digital audio playback
11: [ 1- 0]: digital audio capture
12: [ 1- 0]: hardware dependent
13: [ 1] : control
33: : timer

in the audio devices, should I put in three entries:-

Name, Mac address, Audio Device, SoftVol
VortexBox xx:xx:xx:xx:xx:xx hw:0,3 (tick or untick)
VortexBox xx:xx:xx:xx:xx:xx hw:2,0 (tick or untick)
VortexBox xx:xx:xx:xx:xx:xx hw:1,0 (tick or untick)


And question two is:-
how can I add another 2TB internal SATA HD to the Storage folder, can it be done ?

many thanks for your support !