after clean iso install mysqueezebox no longer playing [RESOLVED]

[kdnel]

after doing a clean iso install, because of problems I was having after my last update.
I no longer can listen to my app's and internet radio (sounds like static).
My apps show up in LMS but do not play correctly.

This was working before I did the new install, so I have no idea what to do.

I am using a VBA and vortexbox player through usb to my Peachtree Nova DAC.
Control is with iping on an ipod.

After the new install allot of things changed (ip#, player MAC#) I did reconnect to
mysqueezebox.com, but still no joy.

[Macross]

What is the output of "aplay -L" ? Please post it here, so I can help you with the vortexbox player configuration page.

[kdnel]

logged in, aplay-L:command not found.

[andrew]

What is the device name you are using in the VortexBox Player configuration for your USB device?

[kdnel]

this is what player configuration displays.


ALSA device list
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfea78000 irq 44
1 [DAC ]: USB-Audio - USB Audio DAC
Burr-Brown from TI USB Audio DAC at usb-0000:00:1d.1-2, full speed

List of audio device ports
1: : sequencer
2: [ 1- 0]: digital audio playback
3: [ 1] : control
4: [ 0- 2]: digital audio capture
5: [ 0- 0]: digital audio playback
6: [ 0- 0]: digital audio capture
7: [ 0- 0]: hardware dependent
8: [ 0] : control
33: : timer

[Macross]

There is a space inbetween aplay -L sorry for the misstyping.

[kdnel]

allright, there is allot of lines here, but I have no way to paste it. I log in with a keyboard and my flat TV as a monitor.
what should I be looking for?

[Macross]

null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=DG
Xonar DG, Multichannel
Default Audio Device
sysdefault:CARD=DG
Xonar DG, Multichannel
Default Audio Device
front:CARD=DG,DEV=0
Xonar DG, Multichannel
Front speakers
surround40:CARD=DG,DEV=0
Xonar DG, Multichannel
4.0 Surround output to Front and Rear speakers
surround41:CARD=DG,DEV=0
Xonar DG, Multichannel
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=DG,DEV=0
Xonar DG, Multichannel
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=DG,DEV=0
Xonar DG, Multichannel
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=DG,DEV=0
Xonar DG, Multichannel
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=DG,DEV=0
Xonar DG, Multichannel
IEC958 (S/PDIF) Digital Audio Output

Here is the output of aplay -L on my vortexbox
It depends on which output that you want to use, If its the analog then look for the front:CARD=DG,DEV=0 and use front:CARD=DG,DEV=0 in the Vortexbox Player configuration page. If you want to use the digital output it would be iec958:CARD=DG,DEV=0 and you would use iec958:CARD=DG,DEV=0 in the Vortexbox Player configuration page. If you have a windows computer, Cryptoterm would allow you to login remotely and post the output of aplay -L
If you are not going to use the analog output of the motherboard sound card, you would save yourself some time and just disable it in the bios.

[kdnel]

I'm running OSX but cant figure out how to use terminal. I have device set to "hw:1,0".

[Macross]

Open up a terminal window and ssh into the vortexbox. Then you can type in the command aplay -L